Built in Compensation Pn16 ANSI 150 Wafer Type Hart Output Oxygen Hydrogen Vortex Flow Meter

• Customization: Available
• After-sales Service: Maintenance & Refund
• Warranty: 1 Year
• Model NO.: HG-VFM Vortex Flow Meter
• Accuracy: ±0.2-0.5%
• Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas, Steam
• Size: DN 15-DN300(1/2" - 12"); DN 300-DN 1000 (Plug-in)
• Sensor: Thread / Flange / Clamp on
• Application: Industrial Production
• Type: Vortex Flow Meter
• Measuring Media: Liquid
• Measuring Principle: Vortex Flow Meter
• Measurement Object: Closed Pipeline
• Certification: JIS, DIN, ANS, GB, CE, RoHS, ISO
• Line Size: DN 15-DN300, DN 300-DN 1000
• Working Temperature: -40-330 Deg.C, -40-500deg.C
• Working Pressure: 4.0MPa
• Housing Material: 1Cr18Ni9Ti
• Atmospheric Pressure: 86 - 106 Kpa
• Humidity: 5% -95%
• Power Supply: 3.6V Battery,12V DC, 24V DC
• Protection Level: IP 65 / IP 67 / IP 68
• Ambient Temperature: -20 - 55 Deg.C
• Ambient Pressure: 86 -106 Kpa
• Signal Output: Pulse,4-20mA, RS 485
• Signal Transmission Distance: 1,000m
• Display: No and LCD Display
• Connection: Flange, Thread, Tri-Clamp on,Swagelok Connection
• Display Units: M3/H, Kg/Hr, Nm3/H
• Transport Package: 14kg
• Specification: 55*25*20cm
• Trademark: Siko Instruments
• Origin: China
• HS Code: 9026100000
• Production Capacity: 999 Units / Weeks
• Package Size: 55.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 14.000kg

Product Description

Built In Compensation Pn16 Ansi 150 Wafer Type Hart Output Oxygen Hydrogen Vortex Flow Meter
 

      Vortex Flow Meter is a kind of velocity flow meter based on the based on the Karman Vortex Principle for measurement and metering of conventional gases, vapors and liquids.It takes piezoelectric crystal to detect the vortex frequency generated when a fluid pass through a triangular prism in a pipe, thereby measuring the flow of the fluids.The vortex flow sensor has high precision and a wide range ratio. It has no moving parts in use, which can improve mechanical stability and reduce maintenance.Vortex is almost unaffected by the temperature, pressure and composition of the medium when measuring the working volume, so it is convenient for the calibration production of the instrument. It widely used in oil, chemical, light industry, power heating and other industries.

     The Vortex Flow Meter is the only type of flow meter that can measure all three phases of a fluid - liquid, gas and steam.
Vortex flow meter make use of the only flow measurement technology that is capable of performing steam flow measurement in one integrated package, this ability makes it best and most economical solution for steam flow measurement. 

The vortex flow meter can also be offered with integrated pressure and temperature measurement for both compressed gas and steam flow measurement in order to allow the meter to compensate for variations in pressure and temperature thats will affect volumetric flows of compressible media. The vortex meter's no-moving-parts design provides users with maintenance free operation and long service life even in dirty and contaminated media applications.

Features

01	Wide variety of applications with steam, gas and liquids medias.
02	No moving parts and no leak paths; no o-ring or graph oil seals to wear, fail or leak.
03.	Wide measuring range with turndown ratio of 1: 30.
04.	Best and most economical solution for steam flow measurement in one integrated structure.
05.	Two independent sensors allowing for better signal amplification and noise reduction.
06.	Error messages displayed for or erratic flows and flows outside of calibrated ranges.
07.	Ture 2-wire 4-20mA interface.
08.	Strong Corrosion And Pollutant Resistance (Acid And Alkaline).
09.	Integrated pressure and temperature compensation allow the meter to compensate for variations in pressure and temperature that will affect volumetric flows.

Product Parameters

Measuring Range & Pressure

Outline Dimension

Selection Table

Company Profile