High Precision 220V High Viscosity Grease Gear Metering Pump for Lubrication Oil

Product Description

High Precision 220V High Viscosity Grease Gear Metering Pump For Lubrication Oil

 

     The Siko Instruments - GP Series Gear Metering Pump basically comprises a front plate, a center plate, two wear plates and a rear plates, the pairs of gear, a pump shaft and a drive shaft which are guided in high-precision bearings. The port for inlet and outlet of the pumps are implemented on the rear plate.  However, these can also be accommodated in a customised adapter block which is bolted to the pump.

     To achieve the greatest precision, reproducibility and the best possible total efficiency, the clearances inside the pump are adapted depending on medium to be delivered, the differential pressure and the viscosity. With the use of suitable structural innovations this series can also be used to shear and friction sensitive media.  By individually adapting to the actual operating conditions and the structural design, high reproducible volumentric efficiencies can be achieved. Moreover, the GP gear dosing pump with it's special gear teeth supports low-pulsation dosing of various media.

     The specific series including glue metering pump, coating metering pump, spinning metering pump, auxiliary metering pump, hot melt metering pump and etc...It widely used in pharmaceutical filling, food filling, chemical dosing, paint and coating, PU dispensing machine, foaming equipment, epoxy resin, hot melt adhesive, polyurethane equipment and other industrial and chemical process and control.

1) Volume Principle: The gear metering pump is a volumetric principle. The liquid is sucked into the suction chamber through a group of engaged gears under the action of the pressure difference, and then the medium is discharged from the cavity as it rotates.

2) Precise Metering: The precision of the gear metering pump is very high, and the volume discharged per revolution is constant, so the flow rate of the metering pump can be obtained by adjusting the speed of the gear metering pump.

3) Quantitative Addition: The displacement of the gear metering pump per revolution is fixed. Therefore, by adjusting the rotational speed of the gear metering pump and then controlling the number of revolutions of the gear metering pump, quantitative addition can be performed with an accuracy of 0.3% to ensure the accuracy of its addition.

 

Place of Origin	Hefei City Anhui Province China
Structure	Gear Metering Pump
Brand Name	Siko Instruments
Model Number	GP Series Gear Metering Pump
Rated Power	0.4kw  / 0.75kw / 1.5kw / 2.2kw ...
Voltage (V)	AC 220/380V
Motor	Servomotor / Servo Gear Motor
Application	Adhesive Application, Liquid Metering, Extrusion ... etc
Motor Speed (R/min)	1-400rpm
Flow CC/Rev	0.15 - 3.6 CC/Rev  4.0 - 30 CC/Rev  30 - 120 CC/Rev
Inlet / Outlet Port	10/18mm
Maximum Head	20-25m Gear Pump
Material	Work Tool Steel, High Speed Steel, Cold Work Steel, Stainless Steel...Stellite...etc
Min Inlet Pressure	<0.2Mpa
Max Outlet Pressure	<8.0Mpa
Fluid Temperature / Operating Temperature	Std: -30 - 200ºC  Opt: -30 - 330ºC

 

Product Description

Detailed Photos

 

01.	High-Precision "Start - Stop - Doses"
02.	Compact Small Size And Light Weight.
03.	Good Sealing Performance With No Leakage.
04.	Suitable For Different Applications Such As Spraying, Spinning, Filling...etc.
05.	Standard Tool Steel Material, Wear-Resistant And Corrosion-Resistant.
06.	A Variety Of Motors Are Available; Ac Explosion-Proof, Ac Frequency Conversion, Dc Brush-Less And Other Motors Are Available.
07.	Low-Pulsation And Exact Dosing Of The Pumping Fluids.
08.	Suitable For Food Canning, Medicine Canning, Beverage Canning, Chemical Canning, Glue Filling Machine, Glue Machine, Pu Foaming Equipment, Pu Dispensing Machine And Other Liquid Filling And Conveying Without Particles.
09.	Through The Use Of Different Tolerance Classes, The Very Same Pump Type Can Be Used For Low As Well As High Viscosity Fluids.
10.	Volume Micro Gear Flow Meter - G Series From Us Can Be Supplied For Flow Measurement.
11.	Depending On The Requirement, The Special Hard Coatings On The Parts Permit A Wide Range Of Unconventional Applications And Ensure A Long Service Life.

 

Product Parameters

Selection Table

Outline Dimension

Product Display

     

Company Profile

    Hefei Siko Instruments Co,.Ltd. Is A High-Tech Enterprise Commit Into Research And Development, Manufacture Of Flow Instruments, Level Instruments, Pressure Instruments, Temperature Instruments. Located At Hefei City, China, We Have Full Access To Gain The Most Advanced Technology In Field. All These Make Us Full Of Confidence To Provide Products With International Standard. At Present, We Are Mainly Dealing In Gear Flow Meter, Gas Flow Meters, Electromagnetic Flow Meters, Vortex Flow Meters, Turbine Flow Meters, Ultrasonic Flow Meters, Level Sensors, Pressure Sensors, Temperature Sensors...etc. We Are Original Equipment Manufacturer Of Flow Meters With Well-Equipped Testing Facilities And Strong Technical Force. With A Wide Range, Good Quality, Reasonable Prices And Stylish Designs, Our Products Are Extensively Used In Water Supply And Drainage, Chemical, Power Supply, Metallurgical Mine, Oil And Other Industries. 

    Our Products Are Widely Recognized And Trusted By Users And Can Meet Continuously Changing Economic And Social Needs. Welcome New And Old Customers From All Walks Of Life To Contact Us For Future Business Relationships And Mutual Success.